Buzzwords De-Buzzed: 10 Alternative Ways To Deliver Car Keys Cutting

· 6 min read
Buzzwords De-Buzzed: 10 Alternative Ways To Deliver Car Keys Cutting

Car Keys Cutting

The service of cutting car keys is designed to give car owners an extra key in the event the original one has been damaged or lost. It requires special equipment, as well as several different key types.

Knowing about the different types of keys cutting techniques, key types, as well as pricing will assist you in making an informed choice when selecting the right company for car keys cutting services.

Key Blanks

The first step to cutting car keys is choosing the right blank. Key blanks are available cut or already cut. Keys that are cut in advance tend to be more expensive because they are ready for use immediately. They are more precise however, as locksmiths have already traced your existing key onto the blank.

No matter what kind of blank key is used, locksmiths must still cut grooves and notches into it to match various types of pins and wards that are used in locks. The various shapes of notches and grooves can be made by a variety of methods, such as disk-type key cutting machines, pins or warding machines or simply using an file. Locksmiths can also opt to utilize the rotary cutter in place of the pinning or warding machines to make faster, more precise cuts.

The blank will then be tested to make sure that all bits fit properly. This is called "biting" the blank key. The key's bow and shoulders are also designed to determine if the key can be turned in the lock and is the correct size for the lock. The shape of the bow is often engraved with a manufacturer's name or logo to make it easy to identify which makes it easier to find similar keys that are suitable for duplicate.

Most residential key blanks are made up of keys of the cylinder type that have notches and grooves for various pin chambers. The most popular is the Yale pin tumbler cylinder which was created more than 150 years ago to offer greater security than other locks at the time, and required an extremely small key. Cylindrical keys are now utilized by virtually all locks manufactured including high-quality padlocks and office supply locks. They also work with door locks and automobile locks.

Certain key blanks are stamped with various imprints to stop duplicates, such as the key ring or "Do not duplicate" stamp. Some keys are protected from duplication that is not authorized by a patent or registered design, and require a specific license by locksmiths to distribute them. Some keys are restricted and cannot be sold.

Key Cutting Machines

If you're a locksmith and you need to have the right key cutting machine is a must. These machines allow you to cut duplicate keys for customers, offering them an efficient and speedy service. A key cutting machine makes use of a stylus to trace out the shape of a key, and then cut it using a blade to make duplicate keys. These tools are used for various types of keys that include car keys, keys for houses, skeleton keys and Yale locks.

The top key cutting machines come with multiple attachments that can handle various key types and cuts. This allows you to provide a wide range of services to your customers, and can help you save time and cost on replacement keys. The rotary key cutter which is able to cut the majority of keys is the most popular key cutting machine. A Rotary cutter is a machine with two blades rotating to cut both sides of a key at once.  replacement car key cutting 's a reliable and cost-effective tool.

There are also electronic key cutting machines that utilize computers to guide the user through the procedure. These machines are a fantastic option for auto locksmiths that are looking to streamline their business by eliminating the need to manually input key codes. These devices are also more durable than manual counterparts and are able to be upgraded as new software is released.

Key-cutting machines can be programmed to duplicate keys on specific car models. It does this by connecting the machine to an online database which contains all the data necessary for creating duplicate keys. The information is stored within the machine's operating system and is able to cut all of the required cuts for a particular model of vehicle in just a few minutes.


A key cutting machine can be purchased as a stand-alone device or it can be integrated into a mobile app that makes it easier to operate. For example, the Futura Pro Auto is an electronic key cutting machine that comes with a dedicated tablet that provides step-by-step guidance. The tablet can be connected via Wi-Fi with the machine or can be connected directly. This makes it simple to learn how to use the machine and also allows the operator to add new key cuts without needing to replace the jaw assembly.

Key Fobs

A lot of modern cars require a key fob to lock or unlock the doors or to start the engine. Often, the key fob can also have buttons that permit owners to remotely open the trunk, or even open the windows.

Most modern car keys are fitted with an RFID transponder which can read the codes that are stored in it, allowing the vehicle to identify and communicate with the key fob. The key fob transmits radio signals to a receiver in the car, which uses rolling codes and encryption.

The computer in the car then analyzes the signal received from the key fob to determine whether the codes match, and if they do the car is then able to unlock the engine or start it. This is the reason it's so important for drivers to keep their key fobs in good shape.

You'll have to bring the fob from your car to the shop to ensure that it's properly programmed. The shop must follow the manufacturer's programming instructions that usually include the exact sequence of button pressing on the key fob as well as the number of key turns when the ignition is turned. These instructions can be found in the owner's manual for the car or on the automaker's website. They should be followed exactly to avoid any errors.

Some manufacturers offer specific key fobs with additional features like keyless entry, start by pressing a button, and the ability "summon" your vehicle from a parking space, similar to Tesla’s summon feature. These kinds of fobs generally cost a bit more than the regular versions however the added features could be worth it for some drivers.

If you require a new key fob the best thing to do is obtain it from your dealer. A majority of the newer cars come with fobs that must be programmed in order to work with the car. This requires a level of expertise and equipment that locksmiths and dealers do not have. Before purchasing a fob from a dealer, verify your car's warranty and insurance policies to determine if they cover the cost of a replacement.

Key Programming

Car key cutting is more than cutting a piece of metal. It's a service that provides safety, functionality and peace of mind for car owners. Making a spare key or replacing a broken one is a complex process that requires knowledge, skill and the right equipment. You must understand how it works in order to select the right locksmith for the task.

There are a variety of car keys, starting with the traditional metal blanks to the key fobs. The majority of modern keys come with a transponder or remote-control chip that communicates with the vehicle when they are being used. Auto locksmiths can also assist programme these keys. They are specialized pieces of equipment that can read the code on the chip and then send it to your vehicle, which will accept it as an authentic digital signature. This is similar to the way credit cards function and allows you to start your car.

A basic metal key can usually be made by your local locksmith or hardware store. Key fobs that are more recent however, are more intricate and require special software to program. They are not likely to be duplicated at Home Depot or other hardware shops and should only be completed by an auto parts department or locksmith.

Special tools permit the dealer to identify the ID code of your key directly from the ignition module. They can also take the PIN code (depending on make) from the modules. The dealer can then use this information to program a replacement key. This is a more complicated method, but it will save you money.

Many locksmiths are experts on the specific car model and have the right software and technology to do the job properly. They can also provide you with an entry code for your key to get your new key working in the shortest time possible. This is a great method to avoid paying the full price for a replacement, and it's also a lot faster than waiting for the manufacturer of your car to process your request.